Seller Seller Ratings Info Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store

Note: Your submitted review is subject to the license terms set out in our Terms of Use. By submitting your review, you acknowledge that you have the authority to do so and that your review does not violate another party's copyright or intellectual property rights

Product Details
Name Marvair AVPA48ACA000MU-A2-100 - Wall Mount AC, ModPac, 4 Ton, 208-230/1, No Heat, Manual Damper, Scroll Compressor, R410A
Brand Marvair
Item Number AVPA48ACA000M5
Manufacturer Product Number AVPA48ACA000MU-A2-100
SKU - PIM Number 1371469406942
ERP Number 312427
Unit of Measure EACH
Weight 525.0 Pound (lb.)
Length 22.7 Inches (in)
Width 45.0 Inches (in)
Height 86.0 Inches (in)
Hazardous Material No
EPA Cert Required No
Country of Origin USA
Tier ModPac
Equipment Type Air Conditioner
EER 9.5
CFM 1725
Cooling Capacity 46000
Voltage 208-230 VAC
Phase Single
Color Black
Energy Star Rated No
Cased Yes
Condenser Motor HP 1/3 HP
Compressor (1) Scroll
Blower Motor HP 1/2 HP
Tonnage 4
Product Family AVPA
GEM - Case Quantity
ModPac II Air Conditioners Models AVPA12, 24, 30, 36, 42, 48 and 60 (1, 2, 2 1/2, 3, 3 1/2, 4 and 5 tons)

The ModPac II is a cost-effective air conditioner used primarily for modular and relocatable buildings. The unit is built in cooling capacities of 1, 2, 2 1/2, 3, 3 1/2, 4 and 5 tons. A factory installed disconnect is standard. Electric heat can be field or factory installed. Accessories include supply and return grilles and thermostats. The sloped top and built-in mounting flanges, both Marvair firsts, simplify installation. All ModPac II units are listed by ETL and tested to the Air Conditioning and Refrigeration Institute (ARI) Efficiency Standard 390.

Our new M5 ModPac two ton air conditioner has been redesigned with additional features and greater efficiency. The unit has an electronic control board, high and low pressure switches and foil back insulation lining the return air path. In addition, the center-to-center mounting hole width was reduced by 3-3/4", allowing the unit to match the mounting holes on competitor's units.

Ventilation Options
  • "N" damper Manual damper capable of up to 15% outside air. Field adjustable, no pressure relief.
  • "B" damper Motorized, two position damper (open & closed) capable of 0 to 450 cfm of outside air and includes pressure relief. A 24 volt actuator motor controls the damper from an external input, e.g., a CO2 sensor, an energy management system or manual switch. (AVP30-60 only)
  • All Marvair units are ETL listed
  • Continuous product improvements result in inventive designs that maximize unit safety.